*Materials:
1 yard 48” wide Muslin
½ yard lightweight iron-on/fusible pellon
1 yard 48” wide medium to heavy weight iron-on/fusible Pellon
OR 2 yards 24” wide medium to heavy weight iron-on/fusible Pellon
Iron and Ironing Board
Presser cloth
Cutting Mat
Rotary Cutter
Scissors
Ruler
Sewing Pins
Sewing Machine with thread
*These materials will be needed for every page*
Instruction for Pages:
Cut 12 strips 12” x 24” out of the muslin and the medium to heavy weight iron-on/fusible pellon. This will give you 12 pages, 6 front to back, in which to make into a quiet book.
‘Josephs Coat of Many Colors’ Instructions
Materials:
5 sew-on snaps, all the same color
Fabric Markers
5 pieces colored felt
Instructions:
1. Folded edge will be outside edge, Place pattern under one sheet Muslin and pin in place. Leaving enough room on all sides for finishing the edges, and having the pattern page a little extra on the unfinished edge to allow room for eyelets, or sewing into the book.
2. Trace the pattern onto muslin (leaving pattern pinned under muslin). Trace all but the snaps placement.
3. Use the coat strips pattern and trace onto lightweight pellon (when tracing onto Pellon trace onto non-bumpy side).
4. Cut pellon pattern and iron onto lightweight pellon using a presser cloth. Make sure when you iron on you are doing it correctly so you don’t flip your colors on your coat.
5. Cut out coat strips and place on traced page to see what order to color Josephs coat.
6. Color traced page.
7. Hand sew snaps onto felt pieces and Joseph’s coat.
8. Remove pattern, and flip over to do the next page.
‘Tower of Babel’ Instructions
Materials:
Two pieces different colored felt
Fabric Markers
Pinking Shears
Instructions:
Folded edge will be outside edge, Place pattern under one sheet Muslin and pin in place. Leaving enough room on all sides for finishing the edges, and having the pattern page a little to the unfinished edge to allow room for eyelets, or sewing into the book.
Trace the pattern onto muslin (leaving pattern pinned under muslin). Only trace the people and the title.
Color people.
Trace both tower patterns on non-bumpy side of lightweight Pellon paper.
Cut out each of the whole tower pattern (not individual pieces of each tower).
Iron each pattern onto different colors of felt using presser cloth.
Use pinking shears to cut out individual tower pieces, keep pieces in order.
Place tall(up/down pieces) tower first onto muslin, pin and sew into place.
Place side tower on muslin, pin and sew into place.
Instructions for finishing page once both sides are completed:
Iron-on medium to heavy weight pellon to back side of Muslin using a presser cloth.
Sew right sides together, leaving a space on the bottom of the page to flip to correct sides.
Cut corners off, and trim thread.
Invert page, and press corners in from inside.
Hand sew bottom to finish page.
Admire your finished product!!!!
